RFID 125KHZ LF PRELAM INLAY

Material: Copper Coil and PVC
Store temperature: -20°C~+60°C
ize: 5×5, 3×7, 2×4, 2×5, 6×8 format or customized;
Antenna Size: 44.45×10.33 mm

Wet Inlay Size: 47.7×13.375mm
MOQ: 1000

Inlay is a special term for the RFID smart card industry. It refers to a pre-extruded product consisting of multiple layers of PVC sheets containing RFID chips and coils laminated together. Generally consists of two or three layers. There are no printed patterns on the surface, and INLAY products are suitable for the mass production of kinds of RFID cards in the early stage.

Available RFID LF Inlay Chips

RFID chips use radio frequency (RF) signals to exchange data with readers. It usually has a built-in antenna and an integrated circuit IC. The antenna can send and receive radio waves, and the IC is responsible for modulating and demodulating radio signals, as well as the processing and storing data.

Low frequency system (LF): RFID radio wave frequency is 125KHz system, follow ISO/IEC 18000-2 standard.

Please select the corresponding chip according to the system you are using. If you are not sure which one to choose, please contact us.